Exemples Leveable the lifting pool floor - movable floor, pool, movable pool floors, movable floor design, movable floor installation, construction, pool construction, movable floor pool construction, pool builder, liner, technical compartment, swimming, counter-current, counter-current swimming, POOLS

fond mobile, piscine, fonds mobiles de piscines, conception de fond mobile, installation fond mobile

onstruction, construction piscines, construction piscine fond mobile, realisation piscine fond mobile

liner, local technique, nage, contre courant, nage a contre courant, bassin, PISCINES

Home

We are able to offer solutions ideally suited to your requirements, thanks to our many years of experience in movable pool floor installation and our use of powerful software (including AutoCAD, Catia and SolidWorks) to optimise the component design, engineering and manufacturing process.

However, before building a pool, it is very important to be aware of certain requirements for fitting a movable floor.

•	Your pool MUST have a flat bottom.
•	It is important to comply with the nominal pool geometry (lengths, widths, heights and diagonals), the verticality of the walls, and the grade and evenness of the levelling course.
•	The technical compartment for the drive system must be adjacent to the pool.
•	The inner coating must not be simply a liner.
•	Salt-based water treatments must not be used.
•	Any sealed items (spotlights, discharge pipes, etc.) and equipment (counter-current swimming system, sweeper connector, etc.) must be accurately specified. It is important to know the quantity and positions in the pool of such items, to avoid them coinciding with cables or stabilisers.
•	The necessary openings to allow the installation of our system should also be planned.
•	Lastly, you should make allowance for the thickness of the stainless steel platform (250 mm to 300 mm, depending on the finishing covering) when calculating the usable depth of water.
	All the relevant information is available in the Download section.


Building a cast concrete pool with openings	Building a pool using shuttered breezeblocks


Building a pool using polystyrene blocks	Building a pool using polystyrene panels


Building a pool with a tiled finish

Design - Engineering - Manufacturing of movable pool floors
165, chemin de la Grand' Plaine - 83500 La Seyne sur Mer - FRANCE
Tél : +33 (0) 9.51.82.18.51 - Fax : +33 (0) 4.94.94.60.35 - Mobile : +33 (0)6.22.35.42.34
SIRET 509 038 733 RCS Toulon